LHP-160智能恒溫恒濕培養箱適用范圍：Applicable range

LHP-160智能恒溫恒濕培養箱有精確的溫度和濕度控制系統，它為產業研究生物技術測試提供所需要的各種環境模擬條件，可廣泛用于藥物、紡織、食品加工等無菌試驗，穩定性檢查以及工業產品的原料性能，產品包裝壽命等測試。

LHP series constant temperature and humidity incubator, equipped with accurate temperature and humidity control system, provides the various environment simulated conditions for test ofbiotechnology industryresearch and biotechnology test, it is widely applied to the sterility test and stability test of medicine, textile industry, food processing as well as performance test and product packaging life test of industrial product raw material.

LHP-160產品特點Features：

※微電腦液晶溫度濕度控制器，控溫、控濕精確可靠，具有超溫、漏電、停電、傳感器故障報警功能。

The microcomputer-based temperature and humidity controller, featured with the accurate temperature and humidity has the protections against the over temperature, electricity leakage, power failure as well as sensor failure alarming, etc.;

※采用進口無氟制冷壓縮機和循環風機，強制對流空氣循環，效率高，能耗低，噪聲低，溫度分布均勻，使用壽命長。

The imported freon-free refrigeration compressor and circulating blower are used, with the features of forced convection and air circulation, high efficiency, low energy consumption, low noise, homogeneous temperature distribution, long service life;

※采用鏡面不銹鋼內膽，四角半圓弧，易清潔，箱內擱板間距可調。

It adopts the internal bladder made of finished stainless steel as well as four semi-circular corners, which are easy for cleaning, the gap of shelf in the incubator is adjustable;

※高精度、大容量濕度發生器，確保濕度控制發生快，精度高，波動小。

High accuracy and large-capacity humidity generator, ensuring rapid humidity control, high accuracy and small fluctuation;

※設有獨立限溫報警系統，超過限制溫度即自動中斷，保證實驗安全運行，不發生意外（選配）。

Through an independent temperature-limit alarming system （optional）, the incubator can cut off the power automatically if beyond the limiting temperature, to guarantee the safety run of experiment and prevent the accident;

※配置RS-485接口，能記錄溫、濕度參數的變化（選配）。

The equipped RS485 interface （optional） enables the incubator to record the change of temperature and humidity.

※箱門設有觀察窗，箱內裝有照明燈，便于觀察箱內培養物，也可選配雙重門結構，內門采用全鋼化玻璃門。

There is an observation window equipped in the incubator door and an illuminating lamp set in the incubator, both of themfacilitate the observation to culture in the incubator, the double-door structure are also available, the internal door is made of toughened glass.

※在箱體左側配測試孔，便于實驗操作與測量溫度（選配）。

There is a testing hole （optional） mounted on the left of incubator body, taking convenience for experiment operation and temperature measurement

升級型大屏幕液晶屏恒溫恒濕箱除以上功能外，還具有外觀新穎，操作簡單，內置加濕器，可編程控制，可配內置打印機。

Besides above functions, the upgraded type LCD constant temperature and humidity incubator with large screen has the obvious features like novel appearance, simple operation, programmable control and built-in humidifier. And, it may be equipped with built-in printer.

LHP-160技術參數：Technical parameters